Jackle Blowhog: Difference between revisions
No edit summary |
No edit summary |
||
Line 31: | Line 31: | ||
''it's large nose is used to suck prey from the ground.'' | ''it's large nose is used to suck prey from the ground.'' | ||
==clay model== | ==clay model ?!== | ||
*to make a clay mod of a jackle blowhog you need: | *to make a clay mod of a jackle blowhog you need: | ||
*a large circle of light blue clay that never hardens | *a large circle of light blue clay that never hardens |
Revision as of 00:14, 11 August 2010
Jackle Blowhog | |
---|---|
Scientific name | Sus blowus inhalious |
Family | Blowhog |
Areas | Ongoing Ocean |
Carry weight | N/A |
Attacks | Inhales And Exhales Air |
The Jackle Blowhog is an enemy in Pikmin:The Escape. It is most commonly found in the area Ongoing Ocean. It is similar in appearance to the Puffy Blowhog, however it lacks blue and purple stripes. Instead this airborne Blowhog is a light blue color with hot pink fins and dark green markings around its eyes. The Jackle Blowhog exhales weakly in comparison to the Puffy Blowhog, but when it inhales it sucks pikmin in. The pikmin it inhales may be blown out of its snout or they may die, depending on how much health it has left. They will start to die once its health reaches about 25%. Every pikmin that dies will restore its health a little. Purple Pikmin and Captains will only be knocked over when it inhales or exhales, however. These creatures can be defeated by taking them down with several pikmin or at least one Purple Pikmin. Once it is on the ground, it can be swarmed.
notes
olimar
jackle blowhog
Sus blowus inhaleious
blowhog family
it can inhale a large amount of pikmin using it's beak-like nose. it also has a huge amount of hp. it is wise to bring a small amount of pikmin.
louie
cut the head and freeze body to eat on a hot day!
creature reel
it's large nose is used to suck prey from the ground.
clay model ?!
- to make a clay mod of a jackle blowhog you need:
- a large circle of light blue clay that never hardens
- a small circle of hot pink clay that never hardens
- a very small circle of dark green clay
- a small tooth pick
- take all of your light blue clay and make it into an oval with a hose-like front end.
- with the hot pink clay, rip it in half and mke them both into fins so you have two seperate fins.
- make the dark green clay into two small eyes.
- now attach the fins on each side of the oval. this is the jackle blowhogs body.
- take the two dark green 'eyes' and put them on each side of the blowhogs body [make sure there near the hose nose.]
- almost done! with the tooth pick, poke a hole in the nose so it looks like a blowhog nose.
- and finally, put it on a desk for a deceration. if you did it right, it looks like a jackle blowhog!